|
You are in the
System Status Menu
Version Display
Displays the installed C-MOR version.
Used Disk Space
Displays the utilization of the internal hard disk.
System Utilization
The System Utilization displays how much CPU is occupied.
In an ideal case the permanent load of 1,0 per CPU core
should not be exceeded. The graphic is updated each
5 minutes. The times (1, 5 and 15 minutes) show
the time frame in which the results were measured.
The Swap Usage value indicates whether the data memory
(SSD/HDD) is being used to offload RAM. If you have a
SSD in use, this value must be 0 MB, otherwise hardware
failures may occur.
Below the system load, the length of time is displayed
since the last reboot of the system.
Cam Availability In The Network
C-MOR displays what cams are automatically detected in the network.
Cam Recordings
Display of the current cam status, showing where the recording is activated.
Network Utilization
Graphical display of the C-MOR Network Utilization.
Log Files
The log files help to analyse errors. The logfiles
can be send to the C-MOR support if required. Also,
the log files show if emails were sent correctly
from C-MOR.
| |
|
System Status
Version Display
System: | C-MOR15-6 |
System Name: | C-MOR-Demo-V5 |
Version: | 5.2401
|
MAC Address: | 30:9c:23:9c:14:0c |
Used Disk Space
Free Disk Space: | 940.81 gigabyte(s) |
System Capacity: | 4% in use |
System Utilization
Average System Utilization (1 Minute, 5 Minutes, 15 Minutes): 0.53, 0.83, 0.91 (4
CPU cores)
Swap Usage: 0 Megabytes
System Uptime: 108 Days, 21 Hour(s), 59 Minute(s)
Cam Availability in the Network
Cam 1 is available in the Network: 172.31.255.11, TCP-Port 554.
Cam 2 is available in the Network: 172.31.255.12, TCP-Port 554.
Cam 3 is available in the Network: 172.31.255.13, TCP-Port 554.
Cam 4 is available in the Network: 172.31.255.14, TCP-Port 554.
Camera 5 is not active, no check for 172.20.1.41 on TCP-Port 554.
Camera Recordings
Recording for Cam 1 is active.
Recording for Cam 2 is active.
Recording for Cam 3 is active.
Recording for Cam 4 is active.
Recording for Cam 5 is not active!
Network Utilization
System Log File
Mail Log File
Start Page
|
|